Fujitsu SPARC T5440 Bedienungsanleitung Seite 82

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 214
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 81
56 SPARC Enterprise T5440 Server Service Manual July 2009
TABLE: ALOM CMT Parameters and POST Modes on page 56 shows typical
combinations of ALOM CMT variables and associated POST modes.
(No ILOM equivalent.) showfru [-g lines][-s | -d][FRU]
-g lines specifies the number of
lines to display before pausing
the output to the screen.
-s displays static information
about system FRUs (defaults to
all FRUs, unless one is specified).
-d displays dynamic information
about system FRUs (defaults to
all FRUs, unless one is specified).
See “Display Individual
Component Information With the
ILOM show Command” on
page 25.
Displays information about the
FRUs in the server.
show /SYS/keyswitch_state showkeyswitch Displays the status of the virtual
keyswitch.
show /SYS/LOCATE showlocator Displays the current state of the
Locator LED as either on or off.
show /SP/logs/event/list showlogs [-b lines | -e lines |
-v] [-g lines][-p
logtype[r|p]]]
Displays the history of all events
logged in the service processor
event buffers (in RAM or the
persistent buffers).
show /SYS showplatform [-v] Displays information about the
operating state of the host system,
the system serial number, and
whether the hardware is providing
service.
TABLE: ALOM CMT Parameters and POST Modes
Parameter
Normal Diagnostic Mode
(Default Settings) No POST Execution
Diagnostic Service
Mode
Keyswitch Diagnostic
Preset Values
diag mode normal Off service normal
keyswitch_state normal normal normal diag
diag_level max N/a max max
TABLE: Service-Related Commands (Continued)
ILOM Command ALOM CMT Command Description
Seitenansicht 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 213 214

Kommentare zu diesen Handbüchern

Keine Kommentare