Fujitsu SPARC T5120 Bedienungsanleitung PDF herunterladen (Seite 147)

Servicing Motherboard Components 121

FIGURE: Installing the Motherboard Assembly (SPARC Enterprise T5120 Server)

3. Using the green handle and the back edge of the motherboard tray, push down

firmly and equally while sliding the motherboard to the front of the chassis.

Tip – After installing the motherboard into the chassis, ensure that the motherboard

is correctly seated by gently lifting up on the handles. If the board moves upward,

then it is not correctly seated. Ensure that the motherboard tray sits flush with the

chassis floor. Also, check for binds and ensure that the bus bar screw holes are

correctly aligned with the bus bar at the front of the motherboard.

4. Tighten the captive screw that secures the motherboard to the front of its tray in

the chassis.

5. Install the four No. 2 Phillips screws that secure the motherboard to the bus bar.

Note – When you reinstall the motherboard, you must use the correct screws to

attach the motherboard to the bus bar.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 239 240

Keine Kommentare

Fujitsu SPARC T5120 Bedienungsanleitung Seite 147