Fujitsu ST6012 Betriebsanweisung PDF herunterladen (Seite 96)

Using the Optional Wireless LAN

This manual describes the procedures required to properly set up and configure the optional integrated

Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using

the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe

place for future reference.

Wireless LAN Devices Covered by this Document

This document is applicable to systems containing one of the following optional devices:

• Intel Wireless WiFi Link 5300 (533AN_HMW)

• Atheros AR9280AL1E (AR5BHB92) Half Mini-Card Wireless network card

Characteristics of the WLAN Device

• The WLAN devices are Mini-PCI card attached to the main board of the mobile computer.

• The WLAN devices operate in license-free RF bands, eliminating the need to procure an FCC operating

license. The WLANs operate in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower,

middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.

• The wireless devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and

IEEE802.11n (draft)

• The WLAN devices are Wi-Fi certified and operate (as applicable0 at a the maximum data rate of 540 Mbps

(theoretical) in IEEE802.11n (draft) mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in

IEEE802.11b mode.

• The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption.

• The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0,

CCX3.0, and CCX4.0.

ST6000.book Page 96 Monday, November 3, 2008 10:23 AM

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 131 132

Keine Kommentare

Fujitsu ST6012 Betriebsanweisung Seite 96