Fujitsu MAT3147NC/NP Bedienungsanleitung PDF herunterladen (Seite 56)

4-6 C141-E201

(3) Limitation of bottom-mounting

Use all 4 mounting holes on the bottom face.

(4) Environmental temperature

Temperature condition at installed in a cabinet is indicated with ambient temperature measured

30 mm from the disk drive. At designing the system cabinet, consider following points.

• Make a suitable air flow so that the DE surface temperature does not exceed 60°C.

• Cool the PCA side especially with air circulation inside the cabinet. Confirm the cooling effect

by measuring temperature of specific ICs and the DE. These measurement results should be

within a criteria listed in Table 4.1.

Table 4.1 Surface temperature check point

No. Measurement point Criteria

1 Center of DE cover 60°C

2 Read channel LSI 88°C

3 VCM/SPM Driver 92°C

4 HDC 91°C

5 MPU 91°C

Figure 4.6 Surface temperature measurement points

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 129 130

Keine Kommentare

Fujitsu MAT3147NC/NP Bedienungsanleitung Seite 56