Fujitsu SPARC M4000/M5000 Bedienungsanleitung PDF herunterladen (Seite 29)

Chapter 3 Installing the Server 3-5

3.3 Connecting the Administration Console

The serial port on the XSCF Unit is a RJ-45 interface port used to monitor the boot

process and to modify the default settings. The port is monitored and configured

using an administrative console connected to the serial port by a serial cable.

You can monitor and configure the XSCF Unit using any one of the following devices

as the administrative console:

■ ASCII terminal

■ Workstation

■ Terminal server (or patch panel connected to a terminal server)

■ Personal computer

Note – It is possible to connect to the LAN ports using Telnet or ssh access. The

LAN ports have class-B private address values but they will not send out a packet by

themselves until configured.

Note – The modular connector (RCI connector) is not for connection to TNV circuits

See item 1 in FIGURE 3-2.

FIGURE 3-2 shows the locations of the ports on the XSCF Unit.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

Keine Kommentare

Fujitsu SPARC M4000/M5000 Bedienungsanleitung Seite 29