Fujitsu T1000 Bedienungsanleitung PDF herunterladen (Seite 32)

6 SPARC Enterprise T1000 Server Installation Guide • April 2007

The slide rail assembly has the following features:

■ The front and rear sections form the slide rail. The front and rear sections expand

to fit rack depths from 24 in. (610 mm) to 29.0 in. (740 mm).

■ Extension brackets are included in the mounting rail kit. The extension brackets

add 2.9 in. (73 mm) to the length of each slide rail.

■ The mounting bracket slides 13 in. (330 mm) out of the slide rail, then locks in

place. If you unlock the mounting bracket, it slides an additional 4 in. (100 mm)

before separating from the slide rail. The mounting brackets mount directly to the

sides of the server chassis.

■ There are two locks on each server mounting bracket (FIGURE 1-3). The lock

enables the mounting bracket to slide forward. The mounting bracket release

allows you to remove the mounting bracket from the slide rail. You also use the

release when pushing the mounting bracket into the slide rail.

FIGURE 1-3 Mounting Bracket Locks

Mounting bracket release

Mounting bracket lock (2 buttons)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Keine Kommentare

Fujitsu T1000 Bedienungsanleitung Seite 32