Fujitsu answers^2 D1740 Bedienungsanleitung PDF herunterladen (Seite 29)

Adding PCI cards

Removing a memory module

► Push the clips on the right and left of the memory slot outward (1).

► Pull the memory module out of the memory slot (2).

Adding PCI cards

Technical data:

32 bit / 33 MHz PCI slots

5 V and 3.3 V supply voltage

3.3 V auxiliary voltage

PCI bus interrupts - Selecting correct PCI slot

To achieve optimum stability, performance and compatibility, avoid the multiple use of

ISA IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable, then all

involved devices and their drivers must support IRQ sharing.

PCI IRQ Lines connect AGP slots, PCI slots and onboard components to the interrupt controller.

PCI IRQ Lines are permanently wired on the mainboard.

Which ISA IRQs are assigned to the PCI IRQ Lines is normally automatically specified by the BIOS

(see description in "BIOS Setup").

Monofunctional expansions cards:

Standard AGP and PCI expansion cards require a maximum of one interrupt, which is called the PCI

interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot.

A26361-D1740-Z120-1-6319, Edition: 3 English - 19

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

Keine Kommentare

Fujitsu answers^2 D1740 Bedienungsanleitung Seite 29