Fujitsu XG0448 Bedienungsanleitung PDF herunterladen (Seite 39)

XG0448 Hardware Guide Chapter 2 Installation

Connecting the Equipment

2.3.4 Connecting Twisted Pair Cable / SFP+ Module / CX4 Cable

The following describes how to connect twisted pair cable, SFP+ module, and CX4 cable.

SFP+ ports and CX4 ports are fixed at 10Gbps FULL DUPLEX MODE.

Connecting SFP+ Module

Firmly install SFP+ module to SFP+ slot and lock module to the switch.

Caution

Make sure to turn off the power when inserting and pulling out the SFP+ module.

Precautions

• Safely keep a guard cap of SFP+ module.

• Make sure to clean the end face of SFP+ module / optical cable before connecting optical connector because the

end face may possibly be contaminated. Please refer to "2.3.2 Cleaning SFP Module / SFP+ Module / Optical

Connector" (pg.35) for cleaning.

• Do not directly touch the contact part of SFP+ module by hands. Use wristbands when touching SFP+ module.

• Connecting part to the optical cable of SFP+ module is the laser opening.

Insert SFP+ module to the SFP+ slot with a lever locked, and lock the module and the switch.

Connect optical cable (connector shape: DLC) after inserting SFP+ module to the SFP+ slot.

When removing SFP+ module, unlock the lever, module and the switch, and remove the module after unplug the optical

fiber.

opticalcable

SFP+Module

Lever

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 48 49

Keine Kommentare

Fujitsu XG0448 Bedienungsanleitung Seite 39