Fujitsu fi-6010N Betriebsanweisung

P3PC-2372-01ENZ0Network Scanner fi-6010NOperator's Guide

viii5.7 Updating System ... 202 Currently Available System Update ...

664. In Step 3, if [Middle] or [Top & Bottom] is selected, enter both "#1" (upper limit) and "#2" (lower limit). #1: Even numb

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 67Administrator Operations (Touch Panel and Network Scanner Admin

68 Length Magnification SettingIf the scanned output is found to be vertically distorted (stretched or squashed) relative to the actual documents bei

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 69Administrator Operations (Touch Panel and Network Scanner Admin

704. Press the [OK] button.⇒ The information entered is set.HINT• If the IP address is the same as one already in use, network communica-tion problems

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 71Administrator Operations (Touch Panel and Network Scanner Admin

725. Press the [OK] button.⇒The communication settings are set.ATTENTIONIf the network scanner admin tool connection settings are changed, logout and

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 73Administrator Operations (Touch Panel and Network Scanner Admin

746. Select whether or not to enable roaming mode.The default setting is [Off].Select the [On] button to enable roaming mode. If roaming mode is enabl

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 75Administrator Operations (Touch Panel and Network Scanner Admin

Network Scanner fi-6010N Operator's Guide ix5.13 Maintaining Central Admin Settings ... 2175.13.1 Backing Up Central Adm

765. Enter a "DNS Suffix".This can only be set if the [On] button was pressed in Step 4.This may be up to 255 characters long. Alphanumeric

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 77Administrator Operations (Touch Panel and Network Scanner Admin

784.6.6 Setting the NTP Server 1. Select the [Network Settings] tab on the top menu.2. Select the [NTP Server] tab on the left side menu.⇒ The "N

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 79Administrator Operations (Touch Panel and Network Scanner Admin

804.6.7 Setting the Proxy Server 1. Select the [Network Settings] tab on the top menu.2. Select the [Proxy Server] tab on the left side menu.⇒ The &qu

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 81Administrator Operations (Touch Panel and Network Scanner Admin

826. In the "Search Base (DN)" input field, enter the distinguished name of the LDAP search base.The character string entered here will be t

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 83Administrator Operations (Touch Panel and Network Scanner Admin

84Example 3: When searching for (user C, user D), OU=section A, OU=department, DC=example, DC=comFor LDAP server, Active Directory configuration is as

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 85Administrator Operations (Touch Panel and Network Scanner Admin

x6.6.3 Simplex/Duplex... 2676.7 Saving the Scanned Data to a Network Folder ...

864.6.9 Setting the e-Mail LDAP Server If a LDAP e-mail address server is set, the searches within the LDAP List on the "e-Mail Address Book"

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 87Administrator Operations (Touch Panel and Network Scanner Admin

88HINTThe following table shows the correspondence between the administrator "Customize LDAP Search" screen settings, and the regular user s

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 89Administrator Operations (Touch Panel and Network Scanner Admin

904. Press the [List] button for the "Result Format" input field.⇒ The result format screen appears.5. Specify the format of the LDAP search

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 91Administrator Operations (Touch Panel and Network Scanner Admin

924.6.11 Setting the e-Mail Server (SMTP Server) 1. Select the [Network Settings] tab on the top menu.2. Select the [SMTP Server] tab on the left side

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 93Administrator Operations (Touch Panel and Network Scanner Admin

944.6.13 Setting the Network Printers Set a printer connected to the network.The procedure for setting a network printer is as follows.1. Check the pr

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 95Administrator Operations (Touch Panel and Network Scanner Admin

Network Scanner fi-6010N Operator's Guide xi6.12 Maintenance ... 3156.13 Processi

96 Setting the Printer PropertiesUse the following procedures to set a printer.1. From the [Start] menu on the print server, select [Control Panel] -

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 97Administrator Operations (Touch Panel and Network Scanner Admin

98It is recommended to name the printer with an alias that indicates the contents of the properties settings as follows.⇒Follow the prompts on the wiz

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 99Administrator Operations (Touch Panel and Network Scanner Admin

1004. Select a domain .⇒ If login is required, an "Authentication" screen appears.If login is not required, the network tree expands and co

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 101Administrator Operations (Touch Panel and Network Scanner Admi

102 Registering a Network Printer (Network Path)1. Select the [Network Settings] tab on the top menu.2. Select the [Network Printer] tab on the left

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 103Administrator Operations (Touch Panel and Network Scanner Admi

104 Renaming a Network Printer1. Select the [Network Settings] tab on the top menu.2. Select the [Network Printer] tab on the left side menu.⇒ The &

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 105Administrator Operations (Touch Panel and Network Scanner Admi

xii8.3 Network Connection Troubleshooting ... 3548.3.1 Basic Network Operation Tests ... 354

106 Viewing the Printer Details1. Select the [Network Settings] tab on the top menu.2. Select the [Network Printer] tab on the left side menu.⇒ The &

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 107Administrator Operations (Touch Panel and Network Scanner Admi

1085. Press the [OK] button.⇒ The width to be removed from the edges of the scanned data is set.ATTENTIONWhen this setting is enabled, and 600dpi reso

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 109Administrator Operations (Touch Panel and Network Scanner Admi

110 Registering a Network Folder (Network Tree)1. Select the [Network Settings] tab on the top menu.2. Select the [Network Folder] tab on the left si

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 111Administrator Operations (Touch Panel and Network Scanner Admi

1125. Select a computer .⇒ If login is required, an "Authentication" screen appears. If login is not required, the network tree expands and

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 113Administrator Operations (Touch Panel and Network Scanner Admi

1146. Enter a "Network Path".This may be up to 255 characters long.Set the network path in the following format:\\Domain_name\Computer_name\

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 115Administrator Operations (Touch Panel and Network Scanner Admi

Network Scanner fi-6010N Operator's Guide xiiiA.2.1 Paper Type ... 377A.2.

1168. For "Authentication", specify whether or not to save the entered "User Name" and "Password".When the [Remember] bu

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 117Administrator Operations (Touch Panel and Network Scanner Admi

118 Renaming a Network Folder1. Select the [Network Settings] tab on the top menu.2. Select the [Network Folder] tab on the left side menu.⇒ The &quo

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 119Administrator Operations (Touch Panel and Network Scanner Admi

120 Removing a Network Folder1. Select the [Network Settings] tab on the top menu.2. Select the [Network Folder] tab on the left side menu.⇒ The &quo

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 121Administrator Operations (Touch Panel and Network Scanner Admi

1224.6.15 Setting the Destination for Alert Notifications An e-mail address can be specified to which an alert notification will be sent whenever a sc

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 123Administrator Operations (Touch Panel and Network Scanner Admi

1244. Press the [Ping] button.⇒ A ping test is performed and the results are displayed.For more details about the result, refer to "Checking basi

4.6 Using the Network Settings MenusNetwork Scanner fi-6010N Operator's Guide 125Administrator Operations (Touch Panel and Network Scanner Admi

xivD.2.1 Regular User Screen Messages... 409D.2.2 System Log Messages ...

126 Setting the Link Speed/Duplex ModeIf the network is not communicating properly, even though the network operating status is correct, change the L

4.7 Using the Device Status MenusNetwork Scanner fi-6010N Operator's Guide 127Administrator Operations (Touch Panel and Network Scanner Admin T

1284.7.2 Viewing the Usage Status Information about the number of documents that have been scanned and the status of the scanner's consumable par

4.7 Using the Device Status MenusNetwork Scanner fi-6010N Operator's Guide 129Administrator Operations (Touch Panel and Network Scanner Admin T

1304.7.3 Viewing the Add-in Status If an add-in module is installed, the following steps can be performed.For more details about installing an Add-in,

4.8 Using the Operation Logs MenusNetwork Scanner fi-6010N Operator's Guide 131Administrator Operations (Touch Panel and Network Scanner Admin

1323. Select the log you wish to view.⇒ The details of the selected log are displayed.Pressing the [OK] button returns to the "User Log" scr

4.8 Using the Operation Logs MenusNetwork Scanner fi-6010N Operator's Guide 133Administrator Operations (Touch Panel and Network Scanner Admin

1344.8.2 Managing the System LogUp to 1,000 system information logs (such as for startup, shutdown, and system errors) are saved in the scanner. View

4.8 Using the Operation Logs MenusNetwork Scanner fi-6010N Operator's Guide 135Administrator Operations (Touch Panel and Network Scanner Admin

Network Scanner fi-6010N Operator's Guide xiCopyrightNetAdvantage 2007Copyright 2000-2007 Infragistics, Inc.LEADTOOLS for .NETCopyright© 2005 L

136 Downloading the System Log in CSV Format The default file name is "SystemLog.csv".When downloaded to a computer, the file will contain

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 137Administrator Operations (Touch Panel and Network Scanner Admin Too

1385. The user data store (containing users A001 to A100) backed up in Step 2 is restored.⇒ Users A001 to A100 are to be restored, of whom 50 are alr

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 139Administrator Operations (Touch Panel and Network Scanner Admin Too

1405. Enter a file name.Use of a name that includes the scanner name and backup date is recommended.6. Press the [Save] button. ⇒ A backup copy of the

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 141Administrator Operations (Touch Panel and Network Scanner Admin Too

142 Clearing the User Data StoreThe scanner's user data store can be deleted.The user data store contains the following information:• Fax Number

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 143Administrator Operations (Touch Panel and Network Scanner Admin Too

1444. Press the [Save] button. ⇒ The "Save As" dialog box appears.5. Name the file and specify where it should be saved.The file will contai

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 145Administrator Operations (Touch Panel and Network Scanner Admin Too

xiiPortions Copyright© 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 The Regents of the University of California.All rights reserved.Redistribution

146 Resetting Factory Defaults1. Select the [Maintenance] tab on the top menu.2. Select the [System Settings File] tab on the left side menu.⇒ The &q

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 147Administrator Operations (Touch Panel and Network Scanner Admin Too

148HINTThe network interface connection will be lost when the scanner is restarted to complete the system update. To continue with other set-tings, wa

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 149Administrator Operations (Touch Panel and Network Scanner Admin Too

150 Uninstalling an Add-in Module1. Select the [Maintenance] tab on the top menu.2. Select the [Add-in Manager] tab on the left side menu.⇒ The &quo

4.9 Using the Maintenance MenusNetwork Scanner fi-6010N Operator's Guide 151Administrator Operations (Touch Panel and Network Scanner Admin Too

1524.9.6 Obtaining Technical Support If any problems occur when setting up or using the scanner, technical support information can be collected to hel

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 153Administrator Operations (Touch Panel and Network Scanner Admin Tool)44.1

1544.10.2 Setting a Job Sequence A job sequence is a single operation that pulls together several user operations.For example, the operation of sendin

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 155Administrator Operations (Touch Panel and Network Scanner Admin Tool)44.

Network Scanner fi-6010N Operator's Guide xiiiPortions Copyright© 1995, 1996, 1997 Kungliga Tekniska Hogskolan (Royal Institute of Technology,S

1566. Set a job item.Select the list button under [Job Items] to select one of following items:• e-Mail• Fax• Print• SaveWhen the [Delete this Item] b

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 157Administrator Operations (Touch Panel and Network Scanner Admin Tool)48.

1589. If [Print] is selected for the action in Step 6, select the [ ] button to the left of [Print] to make settings for printing.For details about se

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 159Administrator Operations (Touch Panel and Network Scanner Admin Tool)410.

16011. Select the [OK] button.⇒ A job sequence is added to the "Jobs List" window. Copying a job sequenceThis section describes how to copy

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 161Administrator Operations (Touch Panel and Network Scanner Admin Tool)4 D

1624.10.3 Setting a Job Menu A job menu is a menu arrangement of the job sequence set in "4.10.2 Setting a Job Sequence" (page 154).For exam

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 163Administrator Operations (Touch Panel and Network Scanner Admin Tool)4 A

1644. Select the job button and select the [Edit] button.⇒ The "Job Button Settings" window appears.5. Enter the job button name.This may be

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 165Administrator Operations (Touch Panel and Network Scanner Admin Tool)410.

xivINCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

166 Copying a job menuThis section describes how to copy a job menu.1. Select the [Job Menus] tab.⇒ The "Job Menus List" window appears.2.

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 167Administrator Operations (Touch Panel and Network Scanner Admin Tool)4 D

1684.10.4 Setting a Job Group A job group is a group assigned with the job menu set in "4.10.3 Setting a Job Menu" (page 162). Users associa

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 169Administrator Operations (Touch Panel and Network Scanner Admin Tool)43.

1708. Select the [Edit] button.⇒ The "Group Member Settings" window appears.9. Set the login user name format.• If [User Principal Name] is

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 171Administrator Operations (Touch Panel and Network Scanner Admin Tool)410.

172 Editing a job groupThis section describes how to edit a job group.1. Select the [Job Groups] tab.⇒ The "Job Groups List" window appears

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 173Administrator Operations (Touch Panel and Network Scanner Admin Tool)4 A

174 Filtering the LDAP Member ListThis section describes how to filter the LDAP Member List on the "Job Group Member Settings" screen.1. In

4.10 Setting Job FeaturesNetwork Scanner fi-6010N Operator's Guide 175Administrator Operations (Touch Panel and Network Scanner Admin Tool)4Las

Network Scanner fi-6010N Operator's Guide xvPortions Copyright© 1996 Juniper Networks, Inc. All rights reserved.Redistribution and use in sourc

1764. Enter the filter character string.Enter the filter target, in whole or in part.This may be up to 64 characters long.5. Select the [Find] button.

5Network Scanner fi-6010N Operator's Guide 177Chapter 5 Administrator Operations (Central Admin Console)This chapter explains system setting an

1785.1 Using Central Admin Console Window5.1.1 ButtonsThis section describes the buttons displayed on the Central Admin Console window.ButtonShown in

5.1 Using Central Admin Console WindowNetwork Scanner fi-6010N Operator's Guide 179Administrator Operations (Central Admin Console)55.1.2 Input

1805.2 Central Admin Console Quick GuideAdministrator operations for management using the Central Admin Console are as follows.Pre-Settings1. Installi

5.2 Central Admin Console Quick GuideNetwork Scanner fi-6010N Operator's Guide 181Administrator Operations (Central Admin Console)5Scanner sett

1825.3 Pre-settings for Using Central Admin ConsoleThis section explains the required pre-settings for using the Central Admin Console.The pre-setting

5.3 Pre-settings for Using Central Admin ConsoleNetwork Scanner fi-6010N Operator's Guide 183Administrator Operations (Central Admin Console)52

1841. Perform Step 1 to Step 3 of "Installing the Network Scanner Admin Tool" (page 40).⇒ The "Download" screen appears.2. Press t

5.3 Pre-settings for Using Central Admin ConsoleNetwork Scanner fi-6010N Operator's Guide 185Administrator Operations (Central Admin Console)55

xviWinDump3.9.5Copyright© 1999 - 2005 NetGroup, Politecnico di Torino (Italy).Copyright© 2005 - 2006 CACE Technologies, Davis (California).All rights

1865.4 Central Admin Server Login: via the Central Admin ConsoleUsing the Central Admin Console allows an administrator to set multiple scanners via t

5.4 Central Admin Server Login: via the Central Admin ConsoleNetwork Scanner fi-6010N Operator's Guide 187Administrator Operations (Central Adm

1885.4.1 Using Central Admin Console Main Window Links and ButtonsThis section describes the links and buttons shown on the Central Admin Console mai

5.4 Central Admin Server Login: via the Central Admin ConsoleNetwork Scanner fi-6010N Operator's Guide 189Administrator Operations (Central Adm

190 ListsThis section describes the lists shown on the main screen of the Central Admin Console.No. List Name Used to ...1 iScanner Network Show the

5.4 Central Admin Server Login: via the Central Admin ConsoleNetwork Scanner fi-6010N Operator's Guide 191Administrator Operations (Central Adm

1925.5 Setting the Central Admin ServerOperating environment for the Central Admin Server is set up by changing the administrator pass-word and settin

5.5 Setting the Central Admin ServerNetwork Scanner fi-6010N Operator's Guide 193Administrator Operations (Central Admin Console)5 [Change Adm

194 [User Roaming Info (Select & Clear)] buttonThis opens the "User Roaming Info (Select & Clear)" window to delete unnecessary use

5.5 Setting the Central Admin ServerNetwork Scanner fi-6010N Operator's Guide 195Administrator Operations (Central Admin Console)5 Scanner Reg

Network Scanner fi-6010N Operator's Guide xviiIntroductionThank you for purchasing the Network Scanner fi-6010N.This easy-to-use image scanner

196 LDAP ServerConfigures the LDAP server used for the "Job Mode Settings" window displayed by selecting the [Job Mode] link in the Central

5.6 Setting Scanner ConfigurationNetwork Scanner fi-6010N Operator's Guide 197Administrator Operations (Central Admin Console)55.6 Setting Scan

198• Scanner Config FileEnter a full path of the scanner configuration file to be imported.The [Browse] button can be used to specify the file.• [Impo

5.6 Setting Scanner ConfigurationNetwork Scanner fi-6010N Operator's Guide 199Administrator Operations (Central Admin Console)5 [New] buttonTh

200• CommentEnter the comments on the scanner.This may be up to 256 characters long.• [OK] ButtonAdds the entered scanner configuration information an

5.6 Setting Scanner ConfigurationNetwork Scanner fi-6010N Operator's Guide 201Administrator Operations (Central Admin Console)5 Scanner inform

2025.7 Updating SystemSystem can be updated by uploading new system update module and setting update calls.System can be updated from the "System

5.7 Updating SystemNetwork Scanner fi-6010N Operator's Guide 203Administrator Operations (Central Admin Console)5• Scanner Notification Schedul

2045.8 Installing Add-inAdd-in for scanner can be installed by uploading Add-in module and setting update calls.Add-in can be installed from the "

5.8 Installing Add-inNetwork Scanner fi-6010N Operator's Guide 205Administrator Operations (Central Admin Console)5 Upload & Release a New

xviiiCanadian DOC RegulationsThis digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus set out in the

2065.9 Updating Scanner SettingsScanner settings can be updated by uploading new sets of scanner settings and setting update calls.Scanner settings ca

5.9 Updating Scanner SettingsNetwork Scanner fi-6010N Operator's Guide 207Administrator Operations (Central Admin Console)5 Upload & Relea

208• Scanner Notification ScheduleSets the schedule to notify scanner settings.• NowIssues a call immediately.• LaterSpecifies the date and time to is

5.10 Setting the Job ModeNetwork Scanner fi-6010N Operator's Guide 209Administrator Operations (Central Admin Console)55.10 Setting the Job Mod

210 Create & Release New Job Mode SettingsCreates and releases new job mode settings.• [Job Mode Settings] buttonThe button displays the "Jo

5.10 Setting the Job ModeNetwork Scanner fi-6010N Operator's Guide 211Administrator Operations (Central Admin Console)5 [Back] buttonReturns t

2125.11 Viewing Scanner-Side StatusStatus details can be viewed for each of the following update types:• System Update• Add-in Installs• Scanner Setti

5.11 Viewing Scanner-Side StatusNetwork Scanner fi-6010N Operator's Guide 213Administrator Operations (Central Admin Console)5• [Refresh List]

214• [Back] buttonReturns to the "Scanner Details" window.• VersionDisplayed version is different depending on the Update Type of the [Scann

5.12 Viewing Event LogNetwork Scanner fi-6010N Operator's Guide 215Administrator Operations (Central Admin Console)55.12 Viewing Event LogEvent

Network Scanner fi-6010N Operator's Guide xixLCD Peculiarities•The LCD backlight is a fluorescent tube that contains some mercury.•Be aware tha

216• TypeSelect the type of the events to be opened.• ErrorOpens the event logs whose type is Error.• WarningOpens the event logs whose type is Warnin

5.13 Maintaining Central Admin SettingsNetwork Scanner fi-6010N Operator's Guide 217Administrator Operations (Central Admin Console)55.13 Maint

218

6Network Scanner fi-6010N Operator's Guide 219Chapter 6 Regular User OperationsThis scanner is used to scan documents which then can be sent by

2206.1 Loading DocumentsThis section describes how to load documents onto the scanner.6.1.1 How to Load Documents1. Check the number of document sheet

6.1 Loading DocumentsNetwork Scanner fi-6010N Operator's Guide 221Regular User Operations62. Load the documents face down. If only one side is

222HINT• The output tray holds the document sheets after they have been scanned. It can be pulled out and adjusted to the size of the document being s

6.1 Loading DocumentsNetwork Scanner fi-6010N Operator's Guide 223Regular User Operations66.1.2 Loading Documents Using a Carrier SheetA carrie

2243. Load the carrier sheet with the black and white striped section (printed section) facing downwards as shown in the following figure.4. Adjust th

6.1 Loading DocumentsNetwork Scanner fi-6010N Operator's Guide 225Regular User Operations6ATTENTIONThere may be a gap between the front and bac

xxHow Trademarks are Indicated in This ManualReferences to operating systems (OS) and applications are indicated as follows: Where there is no distinc

2266.2 Using Touch Panel Screens: Regular User6.2.1 Common Buttons and IndicatorsAfter the user logs in, the following buttons and indicators are show

6.2 Using Touch Panel Screens: Regular UserNetwork Scanner fi-6010N Operator's Guide 227Regular User Operations66.2.2 Main Menu ScreenThe actua

228[Consumable Alert] buttonAccess the "Consumable Alert" screen.A colored alert indicator is used to warn that a "consumable replaceme

6.2 Using Touch Panel Screens: Regular UserNetwork Scanner fi-6010N Operator's Guide 229Regular User Operations66.2.3 Job Menu ScreenIf the [Me

2306.2.4 Input Fields and Entering CharactersOnly passwords for the following fields are case sensitive.[Message Screen] buttonSet whether or not the

6.3 Logging in: Regular User ModeNetwork Scanner fi-6010N Operator's Guide 231Regular User Operations66.3 Logging in: Regular User ModeLDAP (Ac

2322. Enter a "User Name" and "Password" that has been stored in the LDAP server.If "Global Catalog" is selected for the

6.3 Logging in: Regular User ModeNetwork Scanner fi-6010N Operator's Guide 233Regular User Operations63. Press the [Login] button.⇒ If the user

2346.4 Sending the Scanned Data by e-Mail1. On the "Main Menu" screen, press the [e-Mail] button.⇒ The "Send e-Mail" screen appear

6.4 Sending the Scanned Data by e-MailNetwork Scanner fi-6010N Operator's Guide 235Regular User Operations63. Enter a file name for the scan da

Network Scanner fi-6010N Operator's Guide xxiManufacturerPFU LIMITEDInternational Sales Dept., Imaging Business Division, Products Group Solid

2368. Press the [Scan] button.When [Scan Viewer] is Off, this will be a [Scan&Send] button.⇒ Scanning starts.Each page is briefly shown on the scr

6.4 Sending the Scanned Data by e-MailNetwork Scanner fi-6010N Operator's Guide 237Regular User Operations6After a file has been created from s

2386.4.1 Selecting an e-Mail Address from the e-Mail Address BookAs mentioned in Step 2 of "6.4 Sending the Scanned Data by e-Mail" (page 23

6.4 Sending the Scanned Data by e-MailNetwork Scanner fi-6010N Operator's Guide 239Regular User Operations62. Select the search parameter.Press

240⇒ The screen returns to the "e-Mail Address Book" LDAP list. The selected position is dis-played to the right of the [Search Position] bu

6.4 Sending the Scanned Data by e-MailNetwork Scanner fi-6010N Operator's Guide 241Regular User Operations67. Select the desired e-mail address

2426.4.2 Adding a Contact to the e-Mail Address BookThe following explains how to add a contact to your My List. Contacts cannot be added to the LDAP

6.4 Sending the Scanned Data by e-MailNetwork Scanner fi-6010N Operator's Guide 243Regular User Operations64. Enter the contact details.First n

2446.4.3 Editing a Contact in the e-Mail Address BookThe following explains how to edit a contact stored in your My List. Contacts stored in the LDAP

6.4 Sending the Scanned Data by e-MailNetwork Scanner fi-6010N Operator's Guide 245Regular User Operations66.4.4 Deleting a Contact from the e-

xxiiSymbols Used in This ManualThis manual uses the following symbols in the explanations in addition to the warning indications.Screen Examples in Th

2466.5 Sending the Scanned Data by Fax1. On the "Main Menu" screen, press the [Fax] button.⇒ The "Send Fax" screen appears.2. Ente

6.5 Sending the Scanned Data by FaxNetwork Scanner fi-6010N Operator's Guide 247Regular User Operations64. Press the [Scan&Send] button.Whe

2486.5.1 Selecting a Fax Number from the Fax Number ListAs mentioned in Step 2 of "6.5 Sending the Scanned Data by Fax" (page 246), instead

6.5 Sending the Scanned Data by FaxNetwork Scanner fi-6010N Operator's Guide 249Regular User Operations64. Select a search position setting.By

2506. Press the [Find] button.⇒ The search results are displayed on the right side. Five results are displayed at a time.7. Select a fax number.8. Pre

6.5 Sending the Scanned Data by FaxNetwork Scanner fi-6010N Operator's Guide 251Regular User Operations66.5.2 Adding a Contact to the Fax Numbe

2523. Enter the fax contact details.Recipients may be up to 64 characters long.Fax numbers may be up to 64 digits long. Numbers and the following symb

6.5 Sending the Scanned Data by FaxNetwork Scanner fi-6010N Operator's Guide 253Regular User Operations66.5.3 Editing a Contact in the Fax Numb

2546.5.4 Deleting a Contact from the Fax Number ListFax contact numbers deleted from the list are no longer accessible to any user.1. Open the "F

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 255Regular User Operations66.6 Printing the Scanned Data1. On the "

Network Scanner fi-6010N Operator's Guide xxiiiWarning Label About MaintenanceThe user must not perform repairs on this scanner.Contact your FU

2563. Select a printer.HINTOnly the administrator may add printers to the list, or edit the details of printers already on the list. For more details

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 257Regular User Operations64. Press the [OK] button.⇒ This returns you t

2587. Press the [Scan] button.When [Scan Viewer] is Off, this will be a [Scan&Print] button.⇒ Scanning starts.Each page is briefly shown on the sc

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 259Regular User Operations69. On the "Scan Viewer" screen, pre

2606.6.1 ScalingSet the print size for the scanned data.The setting selected here will be used every time the user prints a document.1. Press the [Sca

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 261Regular User Operations62. Select the print scale of the data.By defa

262Large Small CenterTop LeftSame Same CenterTop LeftPrint Sheet Scanned Data Positioning ResultPrint SheetBScanned DataBScanned DataBScanned DataPrin

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 263Regular User Operations6• 100%The image is printed at full scale, re

264⇒ This returns to the "Print" screen. The selected scaling setting is displayed to the right of the [Scaling] button.Same Same CenterTop

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 265Regular User Operations66.6.2 PositioningSet the print position of th

Network Scanner fi-6010N Operator's Guide iContentsCopyright ...

xxiv Safety PrecautionsThis manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual befo

266For more details on the print scaling setting, refer to "6.6.1 Scaling" (page 260).⇒ This returns to the "Print" screen. The se

6.6 Printing the Scanned DataNetwork Scanner fi-6010N Operator's Guide 267Regular User Operations66.6.3 Simplex/DuplexSet whether to print on o

2686.7 Saving the Scanned Data to a Network Folder1. On the "Main Menu" screen, press the [Save] button.⇒ The "Save" screen appear

6.7 Saving the Scanned Data to a Network FolderNetwork Scanner fi-6010N Operator's Guide 269Regular User Operations63. Select a network folder.

2704. Press the [OK] button.⇒ This returns you to the "Save" screen.5. In the "Save as:" field, enter a file name for the scanned

6.7 Saving the Scanned Data to a Network FolderNetwork Scanner fi-6010N Operator's Guide 271Regular User Operations66. Select if existing files

2729. On the "Scan Viewer" screen, press the [Save] button.⇒ The specified file name is used to save the scanned data in the selected networ

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 273Regular User Operations66.8 Setting the Scan OptionsOn the following s

274• [Quality] tab• [Advanced] tab

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 275Regular User Operations6The following two classes of setting options a

Network Scanner fi-6010N Operator's Guide xxvDo not install the device in locations that has oil smoke, steam, humidity, and dust.Turn the scan

276Setting these scan options may influence other scan settings items.• Setting an option may cause other option settings to become invalid.• Other op

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 277Regular User Operations6Tab OptionSetting which become invalidConditio

278Save File Format PDF— —JPEG • Searchable PDF• PDF Password• High Compression for Color PDF• Color mode, "Auto" or "Black & White

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 279Regular User Operations6Advanced Blank Page Skip—• Carrier Sheet• Page

2806.8.1 Carrier SheetSet whether or not to use a carrier sheet. If a carrier sheet is to be used, set the output size of the scanned image.1. On the

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 281Regular User Operations66.8.2 Color ModeSet whether the document is sc

2826.8.3 Paper SizeSet a paper size for the scan data.1. On the "Scan Settings" screen, select the [Basic] tab.2. Press the [Paper Size] but

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 283Regular User Operations6HINT• If a paper size other than [Auto] is sel

284 Long Page ModeWhen scanning pages which are longer than standard documents, the "Allow long pages" setting must be specified.1. On the

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 285Regular User Operations65. Enter the paper size for the scan data.The

xxviDo not install the scanner on unstable surfaces.Firmly insert the power plug.Do not block the ventilation ports.Do not place heavy objects or stan

2866.8.4 ResolutionChanging the resolution level affects the scan data in the following ways.1. On the "Scan Settings" screen, select the [B

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 287Regular User Operations66.8.5 Scan ModeSet whether one side or both si

2886.8.6 File FormatSet the file format for the scan data.For some scan settings, it may not be possible to select certain file formats.A: Format can

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 289Regular User Operations61. On the "Scan Settings" screen, se

2906.8.7 Searchable PDFWhen the file format is PDF, the scanned data can be converted to a searchable PDF.1. On the "Scan Settings" screen,

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 291Regular User Operations63. Select which pages are to be made searchabl

2924. Press the [OK] button.⇒ This returns you to the "Scan Settings" screen. The selected range is displayed to the right of the [Searchabl

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 293Regular User Operations66.8.8 PDF PasswordPDF files can be locked with

2944. Enter a password and confirm password.Passwords may be up to 16 characters long.In addition to alphanumeric characters, spaces and the following

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 295Regular User Operations66.8.9 CompressionWhen [Auto] , [RGB Color] or

Network Scanner fi-6010N Operator's Guide xxviiProtect the scanner from static electricity.Avoid any contact when scanner is in use.Disconnect

296HINT• When "High Compression for Color PDF" is selected, characters and back-grounds on the document are compressed separately. In order

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 297Regular User Operations66.8.10 BrightnessThe brightness setting can be

2986.8.11 ContrastThe color contrast setting can be adjusted to improve the visual appearance of the scan.1. On the "Scan Settings" screen,

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 299Regular User Operations66.8.12 SharpnessThe sharpness setting adjusts

3006.8.13 Dropout ColorSelecting either green, red, or blue (primary colors), removes the details of the selected color from a scanned image.For examp

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 301Regular User Operations66.8.14 Background RemovalThe background of a s

3026.8.15 Blank Page SkipThe scan process can be set to skip any blank pages in the scanned document.For example, when a stack of documents containing

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 303Regular User Operations66.8.16 Page OrientationAutomatically rotates e

304⇒ This returns you to the "Scan Settings" screen. The selected setting is displayed to the right of the [Page Orientation] button.Page Or

6.8 Setting the Scan OptionsNetwork Scanner fi-6010N Operator's Guide 305Regular User Operations66.8.17 Multifeed Detection (Layer and Length)&

xxviii

3066.8.18 Edge CroppingThe width of the edges of a document to be scanned can be adjusted, so that unwanted sections are not scanned.If using the edge

6.9 Enabling/Disabling the Scan ViewerNetwork Scanner fi-6010N Operator's Guide 307Regular User Operations66.9 Enabling/Disabling the Scan View

308Operations after scanning vary according to whether the "Scan Viewer" is set to "On" or "Off".If sending an e-mail, s

6.9 Enabling/Disabling the Scan ViewerNetwork Scanner fi-6010N Operator's Guide 309Regular User Operations6HINT• During the scan, the following

3106.10 Editing the Scanned Data in the Scan ViewerScanned data can be checked and edited in the "Scan Viewer".6.10.1 Viewing a Scanned Page

6.10 Editing the Scanned Data in the Scan ViewerNetwork Scanner fi-6010N Operator's Guide 311Regular User Operations66.10.2 Rotating a Scanned

3126.10.4 Deleting a Scanned PageSpecified pages can be deleted from the scanned data shown on the "Scan Viewer" screen.If specified pages a

6.11 Checking the User LogNetwork Scanner fi-6010N Operator's Guide 313Regular User Operations66.11 Checking the User LogUp to the latest 100 u

314The following information is shown.Info Info options DescriptionResult In Progress Currently processing a scan operation.OK Operation completed suc

6.12 MaintenanceNetwork Scanner fi-6010N Operator's Guide 315Regular User Operations66.12 Maintenance1. On the "Main Menu" screen, pr

1Network Scanner fi-6010N Operator's Guide 1Chapter 1 Scanner Overview1.1 Scanner Features ...

3166.13 Processing a Job1. On the "Job Menu" screen, press the [Job] button.⇒ The "Message Screen" appears.2. Press the [OK] butto

6.13 Processing a JobNetwork Scanner fi-6010N Operator's Guide 317Regular User Operations63. Check the scanned data.For more details about the

318⇒ If the job is processed successfully, the touch panel screen returns to the "Job Menu".If an error occurs during the job process, press

6.13 Processing a JobNetwork Scanner fi-6010N Operator's Guide 319Regular User Operations66.13.1 Enabling/Disabling the Message ScreenYou can s

320Operations differ according to whether the [Message Screen] button is "Off" or "On".Job process when the [Message Screen] butto

7Network Scanner fi-6010N Operator's Guide 321Chapter 7 Scanner Care This chapter describes how to clean the scanner and replace worn out parts

3227.1 Cleaning7.1.1 Cleaning MaterialsThe following table shows the cleaning materials to be used with this scanner. * Contact your FUJITSU scanner d

7.1 CleaningNetwork Scanner fi-6010N Operator's Guide 323Scanner Care77.1.2 Which Parts and WhenClean all parts after every 1,000 sheets scanne

3247.2 Cleaning the ADFThe ADF should be cleaned after approximately every 1,000 scanned sheets. However, this criteria varies according to the type o

7.2 Cleaning the ADFNetwork Scanner fi-6010N Operator's Guide 325Scanner Care72. Clean the following parts with a soft cloth moistened with cle

21.1 Scanner Features Basic uses for scanned documentsThis easy-to-operate network scanner is used to scan documents for further use:1. Scanned docum

326• Pad assemblyClean the rubber pads by gently wiping downwards in the direction of the arrows. Take care not to snag and bend the pick springs.ATTE

7.2 Cleaning the ADFNetwork Scanner fi-6010N Operator's Guide 327Scanner Care7• Feed rollersUse the following procedure when cleaning the feed

3285) Press the [c] key on the keyboard.⇒ The feed rollers will advance one step each time the [c] key is pressed. Lightly press a soft cloth moistene

7.2 Cleaning the ADFNetwork Scanner fi-6010N Operator's Guide 329Scanner Care73. Holding both sides of the top cover, return it to its original

3307.3 Cleaning the LCD Touch PanelTo prevent the touch panel screen from becoming dirty, it should be regularly cleaned with a soft, dry cloth.Take c

7.4 Cleaning the Keyboard/Keyboard CoverNetwork Scanner fi-6010N Operator's Guide 331Scanner Care77.4 Cleaning the Keyboard/Keyboard CoverTo pr

3327.5 Cleaning the Carrier SheetIf the surface or interior of the carrier sheet becomes dirty or dusty, use a soft dry cloth slightly moistened with

7.6 Replacing PartsNetwork Scanner fi-6010N Operator's Guide 333Scanner Care77.6 Replacing PartsThe following table specifies the replacement p

3341. On the Main Menu, press the [Consumable Alert] button.⇒ The "Consumable Alert" screen appears.2. Check which part needs to be replaced

7.6 Replacing PartsNetwork Scanner fi-6010N Operator's Guide 335Scanner Care77.6.1 Replacing the Pad Assembly1. Remove any documents from the A

1.1 Scanner FeaturesNetwork Scanner fi-6010N Operator's Guide 3Scanner Overview1 Configure and manage with easeConfiguration and management of

3365. Close the top cover.You should hear a click when it is returned to its original position.6. Reset the pad assembly usage counter.The usage count

7.6 Replacing PartsNetwork Scanner fi-6010N Operator's Guide 337Scanner Care74. Remove the pick roller and its shaft from the scanner.1. Squeez

3385. Remove the pick roller from the shaft.Lift up the lock tab and slide the pick roller off the shaft.6. Attach the new pick roller.Insert the shaf

7.6 Replacing PartsNetwork Scanner fi-6010N Operator's Guide 339Scanner Care77. Insert the pick roller and shaft back in the scanner.To attach

3407.6.3 Purchasing the Carrier SheetIf the "Carrier Sheet" provided with the scanner can no longer be used for scanning due to damage or we

7.7 Replacing the Keyboard CoverNetwork Scanner fi-6010N Operator's Guide 341Scanner Care77.7 Replacing the Keyboard Cover1. Remove the keyboar

3425. Flip up the keyboard cover and remove the paper backing from the bottom strip of double-sided tape.6. Gently stretch the keyboard cover forward

7.8 Performing a Scan TestNetwork Scanner fi-6010N Operator's Guide 343Scanner Care77.8 Performing a Scan TestAfter scanner cleaning or replace

3444. Press the [Scan] button.⇒ The scan test starts.When the scan test has completed, the "Scan Viewer" screen appears.If the scanner fails

7.8 Performing a Scan TestNetwork Scanner fi-6010N Operator's Guide 345Scanner Care76. Press the [OK] button.⇒ The "Maintenance" scre

41.2 Part Names and Functions1.2.1 External Parts1. Startup button2. SCAN button3. LCD touch panel4. Keyboard5. Output tray6. ADF paper chute7. Side g

346

8Network Scanner fi-6010N Operator's Guide 347Chapter 8 Troubleshooting This chapter provides information on dealing with scanner operation pro

3488.1 Removing Jammed DocumentsIf a document jam occurs, follow the procedure below to remove the jammed documents.1. Remove all documents from the A

8.1 Removing Jammed DocumentsNetwork Scanner fi-6010N Operator's Guide 349Troubleshooting83. Remove the jammed document.4. Holding both sides o

350If document jams or multifeed errors occur frequently, try the following procedures.1. Align the edges of the document sheets.2. Lightly grip the e

8.1 Removing Jammed DocumentsNetwork Scanner fi-6010N Operator's Guide 351Troubleshooting83. Load the documents into the ADF paper chute, as sh

3528.2 Dealing with Detached KeycapsIf a keycap comes loose from the keyboard, fit it back onto its original location and push it down until it clicks

8.2 Dealing with Detached KeycapsNetwork Scanner fi-6010N Operator's Guide 353Troubleshooting83. Fit the keycap back onto its original location

3548.3 Network Connection TroubleshootingIf a network connection is not possible, first check the scanner status and system settings.The following sec

8.3 Network Connection TroubleshootingNetwork Scanner fi-6010N Operator's Guide 355Troubleshooting8When checking the network connection status

1.2 Part Names and FunctionsNetwork Scanner fi-6010N Operator's Guide 5Scanner Overview1No. Part name Function1Startup button Turns on scanner

356 Checking the network operating statusCheck the network status.For details about the checking procedure, refer to "4.6.17 Checking the Networ

8.3 Network Connection TroubleshootingNetwork Scanner fi-6010N Operator's Guide 357Troubleshooting8 Checking the NTP server settings by synchr

358 Checking the mail server by sending a test mailOn the "Alert Notification" screen, press the [Test] button to check if an e-mail can be

8.3 Network Connection TroubleshootingNetwork Scanner fi-6010N Operator's Guide 359Troubleshooting88.3.2 Other Network Connection Troubleshooti

3603 When using DHCP, the DHCP server does not operate normally, or there is a problem with the DHCP server settings.If using DHCP, on the "Netwo

8.3 Network Connection TroubleshootingNetwork Scanner fi-6010N Operator's Guide 361Troubleshooting8 Failure to connect to a server by nameIf c

362 Failure to add a network printerIf adding a network printer to/from the scanner is not possible, try the following steps. Also, refer to how to s

8.3 Network Connection TroubleshootingNetwork Scanner fi-6010N Operator's Guide 363Troubleshooting88.3.3 Failure to Access the Scanner using a

3645 The scanner is in standby mode.Press the startup button to start the scanner.6 A proxy server is being used. Set the proxy server to not be used.

8.3 Network Connection TroubleshootingNetwork Scanner fi-6010N Operator's Guide 365Troubleshooting88.3.4 Problems when Connecting to the Scanne

ii Hardware ... 131.4.4 Requirements for Other Servers...

61.2.2 Internal PartsNo. Part name Function1Pad assembly Help to guide documents from the ADF paper chute to the glass scanner windows.2Pick roller3Sh

3668.4 Other TroubleshootingThis section describes problems that may occur during scanning and gives information on how to deal with them. Before requ

8.4 Other TroubleshootingNetwork Scanner fi-6010N Operator's Guide 367Troubleshooting8Multifeed errors occur frequently.Do the documents satisf

368Cannot login with administrator pass-word.Was the Caps Lock on when the password was entered?Turn off the Caps Lock and try logging in again.If the

8.5 Points to Check before Contacting Your FUJITSU Scanner DealerNetwork Scanner fi-6010N Operator's Guide 369Troubleshooting88.5 Points to Che

3708.5.2 Error Status Problem when connecting to the scanner via personal computer Document feed troubleInfo FindingsOS (Windows)Network scanner adm

8.5 Points to Check before Contacting Your FUJITSU Scanner DealerNetwork Scanner fi-6010N Operator's Guide 371Troubleshooting8 Other problemsI

3728.6 Checking the Scanner LabelsThis section provides help on how to check the scanner's two information labels.The following diagrams show whe

8.7 Pre-Maintenance PreparationsNetwork Scanner fi-6010N Operator's Guide 373Troubleshooting88.7 Pre-Maintenance PreparationsBefore sending the

374

Network Scanner fi-6010N Operator's Guide 375AAppendix A ADF Paper SpecificationsThis appendix describes the paper size and quality requireme

1.3 User Types and OperationsNetwork Scanner fi-6010N Operator's Guide 7Scanner Overview11.3 User Types and OperationsThe scanner functions ava

376A.1 Paper SizeThe following paper sizes can be scanned with this scanner:Width: 53mm to 216mm (2.1in to 8.5 in)Length: 74mm to 356mm(*) (2.9in to 1

Network Scanner fi-6010N Operator's Guide 377AA.2 Paper RequirementsA.2.1 Paper TypeThe following paper types are recommended for use with the

378ATTENTION• Carbonless paper contains chemical substances that may damage the pad assembly or the pick and other rollers when documents are fed. Pay

Network Scanner fi-6010N Operator's Guide 379AATTENTIONTake the following precautions when scanning plastic cards (for example ID cards). • In

380A.3 Maximum Document Loading CapacityThe maximum number of sheets that can be loaded into the ADF paper chute is determined by the length and weigh

Network Scanner fi-6010N Operator's Guide 381AA.4 Area not to be PerforatedADF feed problems can occur while scanning if the document has any h

382A.5 Multifeed Detection ConditionsThere are three multifeed detection modes: document layer, document length, and both document layer and length. T

Network Scanner fi-6010N Operator's Guide 383AA.5.3 Detection by both Layer and LengthIf [Both] is selected in "6.8.17 Multifeed Detection

384

Network Scanner fi-6010N Operator's Guide 385BAppendix B Settings ValuesThis appendix describes the scanner operating environment and manag

8Network SettingsIP Address Set the IP addressA A — —page 69Admin Network Set the admin networkA A A (*2) —page 71Central Admin ServerSet the Central

386B.1 e-Mail Address Setting Valuese-Mail addresses may be up to 255 characters long. One of the following e-mail address for-mats must be used:• XXX

Network Scanner fi-6010N Operator's Guide 387CAppendix C Scanner SpecificationsThis appendix gives specifications for the scanner as a whol

388C.1 Device SpecificationsItem SpecificationDimensions (W × D × H) 315mm × 415mm × 281mmPower consumption (AC) 88WWeight 13kgLCD touch panel 8.4-inc

Network Scanner fi-6010N Operator's Guide 389CC.2 Scanner SpecificationsItem Specification NoteScanner type ADF (Automatic Document Feeder)Imag

390

Network Scanner fi-6000NS Operator's Guide 391DAppendix D Operation MessagesThis appendix provides information about messages which may appear

392D.1 Administrator MessagesThe following messages may appear during administrator operation. Messages are displayed in the form of a dialog box as f

Network Scanner fi-6000NS Operator's Guide 393DD.1.1 Administrator Screen MessagesScreen Message ActionScanner Name Scanner name contains invali

394Scanner AdjustmentLength magnification adjustment has not been set.Set a length magnification adjust-ment.Date/Time Date/time setting is invalid. R

Network Scanner fi-6000NS Operator's Guide 395DNTP Server System time synchronization failed. Try the following:• Check the NTP server name and

1.3 User Types and OperationsNetwork Scanner fi-6010N Operator's Guide 9Scanner Overview1Operation LogsUser Log Manage user logsA A — —page 131

396Network PrinterAccess was refused. Contact a server administrator to find out if an access permit has been set.Operation not possible. Network path

Network Scanner fi-6000NS Operator's Guide 397DNetwork PrinterSpecified user needs to renew their password for this network printer.Change the p

398Network FolderAccess was refused. Contact a server administrator to find out if an access permit has been set.Cannot find the network folder path.

Network Scanner fi-6000NS Operator's Guide 399DNetwork FolderSpecified user needs to renew their password for this network folder.Change the pas

400System Status Cannot read data from a scanner unit. If the scanner does not restart auto-matically, disconnect the AC cable from the scanner to tur

Network Scanner fi-6000NS Operator's Guide 401DUser Data StoreUser data could not be restored. The language of the backup file must be the same

402Common Error: problem with XXXXXX.Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.Error code=xxxxxxxResult co

Network Scanner fi-6000NS Operator's Guide 403DD.1.2 System Log MessagesSystem log messages which may appear during administrator operations can

404 ErrorCode Message Action01000014 Technical support data was prepared for download.No action required.01000015 Add-in module was installed success

Network Scanner fi-6000NS Operator's Guide 405DD.1.3 Alert Monitor System Log MessagesSystem log messages which may be received from the scanner

10A: available —: not availableMaintenanceEdit e-Mail AddressesEdit contacts in the e-mail address book — — — Apage 244Edit Fax Num-bersEdit contacts

406 ErrorThe following table gives a summary of system log error messages which may be received from the scanner alert monitoring service.The message

Network Scanner fi-6000NS Operator's Guide 407D81002003 Alert notification e-mail could not be sent.Check the following:• Check if the computer

408 WarningThe following table gives a summary of system log warning messages which may be received from the scanner alert monitoring service.The mes

Network Scanner fi-6000NS Operator's Guide 409DD.2 Regular User MessagesThe following messages may appear during regular user operation.D.2.1 Re

410Login LDAP server is busy. Try the following checks or solu-tions:• Contact a system administrator to have the network settings checked. "8.3

Network Scanner fi-6000NS Operator's Guide 411DScanning Feed Error: Document(s) may not match the set paper size, ADF may have grabbed more than

412Scanning When the file format is [MTIFF], the maximum file size for the total scanned data is 2GB. If the size of the scanned data exceeds 2GB, no

Network Scanner fi-6000NS Operator's Guide 413DScan Test Paper jam has occurred. Remove the documents from the ADF and try again.Try the followi

414e-Mail Address BookSearch has timed out. Contact a sys-tem administrator.Contact a system administrator to check the time of the search time-out.&q

Network Scanner fi-6000NS Operator's Guide 415DPrint Network is busy. Try again later. Wait for a while, and try again.Cannot find the network p

1.4 System RequirementsNetwork Scanner fi-6010N Operator's Guide 11Scanner Overview11.4 System Requirements1.4.1 Requirements for Network Scann

416Print Specified password is no longer valid for this network printer.Try the following:• Login with a different account.• Contact a network adminis

Network Scanner fi-6000NS Operator's Guide 417DPrint Server AuthenticationScan&Buffer job is already queued on the computer that owns the sp

418Save Cannot find the network folder path. Contact a server administrator.File already exists. Choose a different name or change the overwrite permi

Network Scanner fi-6000NS Operator's Guide 419DSave Specified user is no longer able to login to this network folder.Try the following:• Login w

420File ServerAuthenticationCannot find the network folder path. Contact a server administrator.File already exists. Choose a different name or change

Network Scanner fi-6000NS Operator's Guide 421DFile ServerAuthenticationSpecified user needs to renew their password for this network folder.Try

422Others LDAP server response error. Contact a system administrator to check whether the LDAP server is available.An error has occurred. Try turning

Network Scanner fi-6000NS Operator's Guide 423DD.2.2 System Log MessagesSystem log messages which may appear during user operations can be arran

424 Warning ErrorCode Message Action110C0010 Password contains invalid char-acters. Re-enter the password, and try again.Enter a password and try ag

Network Scanner fi-6000NS Operator's Guide 425D110B0001 Search has timed out. Contact a system administrator.Contact a system administrator to c

121.4.2 Requirements for Central Admin ConsoleFor use of the Central Admin Console, the following requirements apply: Software• Operating System • Wi

426110D0007 Current login (LDAP account) has become invalid.Contact a system administrator to have the login account validated.110D0008 The file to be

Network Scanner fi-6000NS Operator's Guide 427D110D004D Access was refused. Login is not possible at this time.Try the following:• Try again whe

42812010003 "From" address was rejected by the server when sending e-mail.Contact a system administrator to check that the specified e-mail

Network Scanner fi-6000NS Operator's Guide 429D12020002 Could not connect to server when sending fax.Try the following:• Check that the LAN cabl

43012040001 Cannot find the network folder path.Try the following:• Check that the LAN cable of the scanner and file server is connected properly.• Ch

Network Scanner fi-6000NS Operator's Guide 431D1204000A Number of network path con-nections has reached the maxi-mum allowed. No more may be spe

43213060001 Scanner initialization has failed. Try turning the power off and back on again. If prob-lem persists, the administrator should contact the

Network Scanner fi-6000NS Operator's Guide 433D84000002 An error has occurred. The sys-tem must be restarted. Any buffered jobs will be canceled

434D.2.3 User LogCode Message Action00000000 --------------------------- No action required.12010001 Scanned data size exceeded maximum size allowed f

Network Scanner fi-6000NS Operator's Guide 435D12010006 SMTP server connection was lost while sending e-mail.Try the following:• Check that the

1.4 System RequirementsNetwork Scanner fi-6010N Operator's Guide 13Scanner Overview11.4.3 Requirements for Central Admin ServerFor use of the C

43612020003 "From" address was rejected by the server when sending fax.Contact a system administrator to check that the specified e-mail sou

Network Scanner fi-6000NS Operator's Guide 437D12040001 Cannot find the network folder path.Try the following:• Check that the LAN cable of the

4381204000A Number of network path con-nections has reached the maxi-mum allowed. No more may be specified.Close unneeded network connections, then tr

Network Scanner fi-6000NS Operator's Guide 439DF4B30000 An error has occurred. Try turn-ing the power off and back on again. The administrator s

440

Network Scanner fi-6010N Operator's Guide 441EAppendix E Glossary

442A4 sizeA standard international paper size. (210 × 297mm / approximately 8.27 × 11.7inches)A5 sizeA standard international paper size. (148 × 210mm

Network Scanner fi-6010N Operator's Guide 443EDefault settingsThe settings installed at time of factory shipping.Duplex scan modeA scan mode wh

444LDAP (Lightweight Directory Access Protocol)A protocol for accessing a directory database over a TCP/IP network.Legal sizeA standard international

Network Scanner fi-6010N Operator's Guide 445EPostcard sizeA standard paper size. (148 × 100mm / approximately 5.83 × 5.94inches)Portrait orien

141.4.4 Requirements for Other Servers For other servers, the following requirements apply:Server Operating system Software productLDAP Server Windows

446

Network Scanner fi-6010N Operator's Guide 447IndexAAC adaptor connector ...5Add-in module ...

448the user logs ...133color mode ...281common buttons

Network Scanner fi-6010N Operator's Guide 449the Central Admin Server software ...182the network scanner admin tool ...40

450paper type ...377paper weight ...377part name

Network Scanner fi-6010N Operator's Guide 451settinga file name format ...62a job group ...

452the user log details ...131WWINS server ...16wood containing pa

z The contents of this manual are subject to change without notice.z PFU LIMITED is not liable whatsoever for any damages resulting from the use of th

1.4 System RequirementsNetwork Scanner fi-6010N Operator's Guide 15Scanner Overview1 LDAP ServerLDAP (Lightweight Directory Access Protocol) i

Network Scanner fi-6010N Operator's Guide iii3.2 Required Scanner Function Settings ... 29Chapter 4 Administrator Oper

16 File ServerThe file server shares the disk on a server with other computers on a network, and enables use of the disk from an external computer. U

1.4 System RequirementsNetwork Scanner fi-6010N Operator's Guide 17Scanner Overview1 DHCP ServerThe DHCP server automatically assigns an IP ad

181.4.5 Network Requirements This section describes the required network conditions for the following cases. If iScanner Central Admin is usedThe fol

1.4 System RequirementsNetwork Scanner fi-6010N Operator's Guide 19Scanner Overview11.4.7 List of Port Numbers for Scanner UseFunction From/To

20

2Network Scanner fi-6010N Operator's Guide 21Chapter 2 Basic Scanner Operations2.1 Using the Scanner Buttons...

222.1 Using the Scanner Buttons2.1.1 Using the Startup ButtonWhen the scanner is off or in standby mode, pressing the startup button will start the sc

2.1 Using the Scanner ButtonsNetwork Scanner fi-6010N Operator's Guide 23Basic Scanner Operations22.1.2 Using the Scan ButtonWhen the [Scan] bu

242.2 Using the LCD Touch PanelWhen using the LCD touch panel, buttons only need to be lightly pressed to select them.For details how to operate the t

2.3 Using the KeyboardNetwork Scanner fi-6010N Operator's Guide 25Basic Scanner Operations22.3 Using the KeyboardSelecting buttons or entering

iv4.5.11 Setting Scanning Performance ... 67 Offset Settings ...

262.3.2 Using the Keyboard: Regular UsersKey Used to ...Tab Switch focus to the next field or button.Space Select the button in focus.Enter Set the co

3Network Scanner fi-6010N Operator's Guide 27Chapter 3 Administrator Operations (Overview) 3.1 Operating and Managing Scanners...

283.1 Operating and Managing ScannersScanner settings management can be implemented in the following ways.• LCD Touch PanelScanner settings management

3.2 Required Scanner Function SettingsNetwork Scanner fi-6010N Operator's Guide 29Administrator Operations (Overview)33.2 Required Scanner Func

30N: Necessary A: Advisable —: Not required(*1): Only necessary if connecting to an LDAP serverNetwork SettingsIP AddressN N N Npage 69Admin Network—

4Network Scanner fi-6010N Operator's Guide 31Chapter 4 Administrator Operations (Touch Panel and Network Scanner Admin Tool)This chapter provid

324.1 Administrator Screens via the Touch Panel4.1.1 Menu Tabs and ButtonsOn the touch panel screens (administrator), when one of the top menu tabs is

4.1 Administrator Screens via the Touch PanelNetwork Scanner fi-6010N Operator's Guide 33Administrator Operations (Touch Panel and Network Scan

344.2 Administrator Screens via the Network Interface4.2.1 Menu Tabs and Buttons• When the [Scanner Settings] button is pressedOn the network scanner

4.2 Administrator Screens via the Network InterfaceNetwork Scanner fi-6010N Operator's Guide 35Administrator Operations (Touch Panel and Networ

Network Scanner fi-6010N Operator's Guide v4.6.16 Checking the Network Connection with a Ping Test ... 1234.6.17 Checking the Network Ope

364.3 iScanner Administrator Login: via the Touch Panel ATTENTION• If the normal screen display does not appear, wait for a few minutes and try again.

4.3 iScanner Administrator Login: via the Touch PanelNetwork Scanner fi-6010N Operator's Guide 37Administrator Operations (Touch Panel and Netw

384.4 iScanner Administrator Login: via the Network Scanner Admin Tool The network scanner admin tool can be set up to manage the scanner via a person

4.4 iScanner Administrator Login: via the Network Scanner Admin ToolNetwork Scanner fi-6010N Operator's Guide 39Administrator Operations (Touch

40 Installing the Network Scanner Admin ToolTo setup the scanner via the network interface, install the network scanner admin tool to your per-sonal

4.4 iScanner Administrator Login: via the Network Scanner Admin ToolNetwork Scanner fi-6010N Operator's Guide 41Administrator Operations (Touch

426. Press the [Next] button.⇒ The "Select Installation Folder" window appears.7. Specify an installation folder for the network scanner ad

4.4 iScanner Administrator Login: via the Network Scanner Admin ToolNetwork Scanner fi-6010N Operator's Guide 43Administrator Operations (Touch

444.4.2 Logging InThis section explains how to login using the network scanner admin tool.ATTENTION• If the normal screen display does not appear, wai

4.4 iScanner Administrator Login: via the Network Scanner Admin ToolNetwork Scanner fi-6010N Operator's Guide 45Administrator Operations (Touch

vi4.9.5 Setting the Information Output Level ... 1514.9.6 Obtaining Technical Support ...

464. Enter a "User Name" and "Password".Enter "admin" for the user name.Passwords must be between 7 and 127 characters l

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 47Administrator Operations (Touch Panel and Network Scanner Admin

484. Touch the "+" with your fingertip.Repeat until the test screen appears, with the following "Calibration" dialog box:HINTThe k

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 49Administrator Operations (Touch Panel and Network Scanner Admin

504.5.2 Setting the Scanner Name A scanner name may be set to provide a network alias for the device.1. Select the [System Settings] tab on the top me

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 51Administrator Operations (Touch Panel and Network Scanner Admin

526. Press the [Now] button.⇒ The system is restarted.HINT• If the new scanner name is the same as another device name already in use on the network,

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 53Administrator Operations (Touch Panel and Network Scanner Admin

544.5.4 Setting the Region/Timezone 1. Select the [System Settings] tab on the top menu.2. Select the [Region/Timezone] tab on the left side menu.⇒ Th

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 55Administrator Operations (Touch Panel and Network Scanner Admin

Network Scanner fi-6010N Operator's Guide vii5.3.2 Installing the Central Admin Console ... 1835.3.3 Setting up a

566. Press the [OK] button.⇒ The date and time are set.HINT• Pressing the [Get Time] button refreshes the current value of the internal system date/ti

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 57Administrator Operations (Touch Panel and Network Scanner Admin

583. Press the [List] button for the "Logout after" input field.⇒ A list of "Logout after" times appears.4. Select the desired tim

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 59Administrator Operations (Touch Panel and Network Scanner Admin

604. Enter a user name and password.User name and password can only be set if the [On] button was selected in Step 3.The scanner follows the Active Di

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 61Administrator Operations (Touch Panel and Network Scanner Admin

624.5.9 Setting a File Name Format Up until now, default values for have been shown for the following file name settings.• "File Name" on th

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 63Administrator Operations (Touch Panel and Network Scanner Admin

644.5.10 Setting the Multifeed Detection Method By default, multifeed detection will monitor for paper overlaps in the central column (width: 35mm) of

4.5 Using the System Settings MenusNetwork Scanner fi-6010N Operator's Guide 65Administrator Operations (Touch Panel and Network Scanner Admin