Fujitsu S series Bedienungsanleitung PDF herunterladen (Seite 64)

Security functions

54 A26391-K144-Z120-1-7619, edition 2

Password error alarm

If the password is entered incorrectly three times, a one-minute alarm is triggered. If the correct

password is still entered during the alarm, the notebook boots as usual.

After one minute the notebook stops the alarm. The user must press the Suspend/Resume key. The

key symbol

appears in the display field - the user must now enter the correct user password.

Upon correct entry the notebook boots.

Changing or removing security password

After you have installed the programs FJSECS.EXE and FJSECU.EXE, you will find the entry Security

control under Start - Programs. Here you can change or completely remove your user password. In

this case follow the instructions of the programme.

Configuring password protection in BIOS Setup

Before using the various options of password protection for your data security in the BIOS

Setup, please note the following hints:

● Please keep in mind your passwords in any case, as you will not be able to access

your BIOS Setup and/or your system any longer, if you forget both the user password

and the supervisor password.

The loss of passwords is not a warranty case and is therefore subject to charge.

● Back up your data on external data carriers at regular intervals.

Passwords can be up to eight characters long. You can use all alphanumeric characters

and need not distinguish between uppercase and lowercase characters.

Password protection for BIOS Setup (supervisor and user

password)

We recommend that you print out the following instructions, as these cannot be displayed while

setting the password.

You prevent unauthorised opening of the BIOS Setup with both the supervisor and the user

password. With the supervisor password you have access to all functions of the BIOS Setup, and with

the user password only to part of the functions. You can only set a user password if a supervisor

password has already been assigned.

Please refer to section "Settings in BIOS Setup" for a description of calling and operating

the BIOS Setup.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 115 116

Keine Kommentare

Fujitsu S series Bedienungsanleitung Seite 64