Fujitsu fi-5000N Bedienungsanleitung PDF herunterladen (Seite 26)

AP-3

Appendix 2 Daily Care

■ Cleaning Materials

* For details about the cleaner F1, contact the FUJITSU dealer where you purchased the fi-5000N.

■ Parts to Clean and When

Before you clean the fi-5000N, turn off its power and unplug the AC adapter

from the outlet.

Cleaning Materials Parts Number Remarks

Cleaner F1

(or isopropyl alcohol)

CA99501-0013 1 bottle

Moisten the cloth with this fluid and wipe the

scanner clean.(*)

Do not use it for cleaning printed characters,

logos and marking areas.

Lint-free dry cloth Commercially available one

Part to clean Cleaning Method Remarks

Cover Wipe the Cover with a lint-free dry

cloth.

Fingerprint Sensor Wipe the Fingerprint Sensor gently

with a lint-free dry cloth.

Do not splash any liquids or allow the

fi-5000N to get wet.

Do not use flammable solvents such as

benzine.

ATTENTION

Cleaning the Fingerprint Sensor

When the fingerprint sensor presents the following, the sensor might not function cor-

rectly. Clean the sensor surface on a regular basis.

• Sensor surface is dirty with dust or any other dirt

• Sensor surface is wet.

• There are dew drops on the sensor surface.

Clean the fingerprint sensor when the following problems occurs. Cleaning the sensor

might solve such problems.

• The Display Message shows "Sensor surface not clean. Please wipe sensor, and

restart device".

• Although the finger is away from the sensor, the Display Message keeps showing

"Remove your finger from the sensor".

• Fingerprint registration failures and/or fingerprint identification failures occur fre-

quently.

1 2 ... 21 22 23 24 25 26 27 28 29

Keine Kommentare

Fujitsu fi-5000N Bedienungsanleitung Seite 26