Fujitsu Sparc Enterprise Server T5440 Bedienungsanleitung PDF herunterladen (Seite 42)

26 SPARC Enterprise T5440 Server Administration Guide • July 2009

5. Remove the hard drive as described in your server’s service manual.

6. Install a new hard drive as described in your server’s service manual.

7. Configure the new hard drive. Type:

For example:

The green Activity LED flashes as the new disk at c0t3d0 is added to the device

tree.

8. Verify that the new hard drive is in the device tree. Type:

Note that c0t3d0 is now listed as configured.

Related Information

■ “Hot-Plug a Mirrored Disk” on page 23

■ “Delete a Hardware RAID Volume” on page 21

usb0/1 unknown empty unconfigured ok

usb0/2 unknown empty unconfigured ok

# cfgadm -c configure Ap-Id

# cfgadm -c configure c1::dsk/c0t3d0

# cfgadm -al

Ap_Id Type Receptacle Occupant Condition

c0 scsi-bus connected configured unknown

c0::dsk/c0t0d0 disk connected configured unknown

c0::dsk/c0t1d0 disk connected configured unknown

c0::dsk/c0t2d0 disk connected configured unknown

c0::dsk/c0t3d0 disk connected configured unknown

c1 scsi-bus connected configured unknown

c1::dsk/c1t0d0 CD-ROM connected configured unknown

usb0/1 unknown empty unconfigured ok

usb0/2 unknown empty unconfigured ok

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

Keine Kommentare

Fujitsu Sparc Enterprise Server T5440 Bedienungsanleitung Seite 42