Fujitsu ST4000 Bedienungsanleitung PDF herunterladen (Seite 57)

Wireless LAN User’s Guide

CONNECTING WINDOWS 2000 SYSTEMS

This chapter describes how to set the wireless LAN

connection for computers running Windows 2000.

Workflow

The proper setup of the wireless LAN requires several

steps which must be performed in the proper order.

Following is a general outline of the steps that must be

performed. Each step is detailed later in this procedure.

1. Setting parameters

■

Setting the profile

■

Setting the encryption

2. Network settings

■

Setting the protocol and checking the network

■

Setting file and printer sharing

■

Checking the connection

Setting Parameters

1. Click [Start]-> [Settings] -> [Control Panel].

2. Double-click the [PRISM Settings] icon. The

[PRISM Wireless Settings] appears.

3. Set the profile as specified in Table 1. Ask your

network administrators to check the setting.

4. When you finish your entry, click [Apply].

Table 1: Profile Parameters

5. Click the [Encryption] tab.

6. Set the encryption items in accordance with Table 2.

■

AdHoc Network: Specify the same value for all the

computers for which the encryption key is used for

connection.

■

Infrastructure Network: Specify the identical encryp-

tion keys to the encryption keys set for the access

point. For instructions on how to check the encryp-

tion keys set for the access point, refer to the access

point manual.

POINT

If you purchased a Stylistic ST4000 Series Tablet PC

with the optional integrated wireless LAN device, the

device and drivers have already been installed. This

procedure outlines the steps for setting the device

parameters.

Updated drivers and/or utilities may become available

after this manual is printed; see any addenda or fliers

that may be included in the system packaging.

Item Description

Profile Enter the system file name in which the

parameter information is to be saved.

Mode Ad Hoc Network: Click the down arrow

and select “802.11 AdHoc”.

Infrastructure Network: Click the down

arrow and select “Infrastructure”.

SSID Enter the network name to which you

want to connect

Transmit

Rate

Obtain the information from your

network administrator. If you do not have

a network administrator, select “Fully

Automatic”.

Power

Save

Enabled

Not supported.

AdHoc

Channel

AdHoc Network: Select the same

channel, 1-11, for all connected

computers. If there is more than one

wireless LAN nearby (such as on the same

floor), we recommend that the channels

for each LAN be 5 numbers apart (e.g., if

there are two other LANs nearby, the

channels used should be 1, 6, and 11).

Infrastructure Network: Not an option.

POINT

Make sure that you specify the encryption keys. If you

do not specify the keys, any computer with a wireless

LAN card can be connected. This presents a risk that

your data may be stolen or destroyed.

Item Description

Encryption

(WEP)

Click the down arrow and select an

encryption option.

■

Disable: Disables the encryption. In

this case, “Create keys with Pass-

phrase” and subsequent items are

greyed out, and you cannot enter

anything.

■

40 bit*: The encryption is set.

Select either “Create keys with

Passphrase”, “Create keys manu-

ally”, or “ASCII Input”, and enter

the encryption keys.

■

104 bit*: The encryption is set.

Select either “Create keys with

Passphrase”, “Create keys manu-

ally”, or “ASCII Input”, and enter

the encryption keys.

Item Description

Alb_UG_Active B.book Page 47 Monday, October 21, 2002 12:15 PM

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Fujitsu ST4000 Bedienungsanleitung Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Tablets Fujitsu ST4000