fi-6670/fi-6770/fi-6750SIntroduction...2Regulatory Information ...
10 fi-6770/fi-6750S (Flatbed type) StackerStacker ExtensionStopperChute Roller CoverPaper ChuteExtensionSide GuideSide Guide ButtonADF Paper ChuteOp
11 Model-Common PartsFunctions of the Operator PanelThe Operator Panel is comprised of a Function Number Display, buttons, and LEDs, which are used t
12 Flatbed type Indications on the Function Number DisplayName DescriptionCheck LEDLights (in orange) when an error occurs.Function Number DisplayIn
132 Installing the ScannerThe following describes how to install the scanner.1 Place the scanner at its installation site.The outer dimensions and the
143) Gently close the Document Cover.4) Change the position of the ADF.The ADF can be set to any of the following three positions:After repositioning
153 Connecting the CablesThe following describes how to connect the cables between the scanner and your computer. The type of the connector for the c
161 Make sure that the computer is turned OFF.2 Open the Cable Cover (ADF type only).3 Connect the scanner to your computer either with a USB or SCSI
174 Installing the Scanner SoftwareBrief Information on the Bundled SoftwareTo scan documents with this scanner, you must install a scanner driver for
18 QuickScan ProTM (trial) [QuickScan Pro (Trial)] (*1)Conforms to the ISIS standard. By using the ISIS scanner driver together with QuickScan ProTM,
19*1: Kofax VRS supports the following Windows Vista versions:- Windows Vista Business- Windows Vista Enterprise- Windows Vista UltimateKofax VRS supp
2IntroductionThank you for purchasing our fi-6670/fi-6770/fi-6750S series Color Image Scanner.Scanner ModelsThis manual covers the following three sca
20The following describes how to install the software.1 Confirm that the scanner is not turned ON.2 Turn on your computer and log onto Windows.3 Inser
21This menu lets you select and install the required software programs one by one. The procedure for custom-installing the required software is as fol
225 Test-Scanning DocumentsUsing ScandAll PRO, you can test-scan documents to check if they are scanned with the ADF correctly. For how to scan docume
234 Load a sheet into the scanner.1)Load the document on the ADF Paper Chute face down.2) Align the side guides to the width of the document.3) Pull o
2410Select the [Scan] menu D [Scan Settings].D The [Scan Settings] dialog box appears.11Clear the [Save to file] checkbox.12Click the [Scanner Setting
25 ISIS scanner driverConfigure scan settings, and then click the [OK] button. Kofax VRSConfigure scan settings, and then click the [OK] button.14In
fi-6670/fi-6770/fi-6750S Image ScannerGetting StartedP3PC-2242-04ENIssue Date: August 2012Issued by: PFU LIMITED• Copying of the contents of this ma
3Regulatory InformationFCC DeclarationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par
4 Operating Systems and Software ProductsThe OSs and products in this manual are indicated as follows:*1) Where there is no distinction between the d
5Warning LabelHOT warning label:The glass surface inside the ADF becomes hot during the operation. Be careful not to touch glass surfaces inside the A
6Make sure to ground the scanner.Make sure to ground to avoid electric shock. Be sure to ground before plugging into a Power outlet.Unplug from the ou
7The following are important cautions described in this manualDo not install the scanner on an unstable work table.When installing the scanner on a wo
81 PreparationContents of the Scanner PackageWhen you unpack the scanner package, make sure that all of the following parts are included in the packag
9Part Names and FunctionsThis section describes the scanner parts and their functions.For information on the function of each part, refer to “Section
Kommentare zu diesen Handbüchern