Fujitsu FTP-633MCL400 Bedienungsanleitung PDF herunterladen

FTP-633MCL400/FTP-623DCL002

■ OVERVIEW

This battery driven, micro line thermal printer offers high speed

printing for 3-inch wide paper (70 mm). It is suitable for portable

equipment that requires compact, lightweight components.

In addition to the interface board, a driving LSI (MCU + Gate

Array) is also available.

■ HIGHLIGHTS

• Driven by batteries (direct connect between thermal

head and batteries)

It can be driven by a broad range of voltages (4.2 to 8.5 V) of

NiCd or Nickel-Hydrogen by using Fujitsu Components'

unique head drive control system. The battery pack can be

connected directly to the print head without a voltage

regulator. Also, a lithium-ion battery can be applied.

• High speed printing

It can print at approximately 24 character lines/s (460

dotlines/s = 60 mm/s).

• Compact and lightweight

It has a light weight of approximately 84 g.

• Low power consumption

The peak current for head driving is approximately 3.0 A.

• Selectable paper paths

Front, rear and top paper insertion paths can be used.

• Paper auto loading function

Paper feeding is enabled by operating the head up lever.

• Variety of suitable paper

This model is capable of printing on a variety of papers,

including 1-ply roll paper, 2-ply paper (TCC and roll), labels,

and long-life paper.

BATTERY DRIVE, MICRO LINE THERMAL PRINTER

3” TYPE MECHANISM AND INTERFACE BOARD

FTP-633MCL400

FTP-623DCL002

FTP-623CU001, FTP-633GA101

1 2 3 4 5 6 ... 11 12

FTP-633MCL400/FTP-623DCL002 1

Inhaltsverzeichnis

Seite 1 - FTP-633MCL400/FTP-623DCL002

FTP-633MCL400/FTP-623DCL002 OVERVIEWThis battery driven, micro line thermal printer offers high speedprinting for 3-inch wide paper (70 mm). It is s

Seite 2

10FTP-633MCL400/FTP-623DCL002No. Signal I/O Contents No. Signal I/O Contents1 HUP I Head up detection 2 VCC — Power for switch3 PINCH I Paper auto loa

Seite 3

11FTP-633MCL400/FTP-623DCL002Name Command ContentsCarriage return LF, CR Prints buffer data and return the line.Double width print set SO Sets the dou

Seite 4

12FTP-633MCL400/FTP-623DCL002 OPTIONSName Part number Cable lengthFor Centronics FTP-621Y202 500 mmInterface cableFor Bus I/F FTP-621Y203 500 mmPower

Seite 5

2FTP-633MCL400/FTP-623DCL002Printing method Thermal-sensitive line dot methodDot structure 512 dots/lineDot pitch (Horizontal) 0.125 mm (8 dots/mm)—Do

Seite 6

3FTP-633MCL400/FTP-623DCL002For print head4.2 to 8.5 VDC (4 or 5 Ni-Cd or Ni-MH batteries, equivalent to 2 Li-ion)Approximately 3.0 A (peak value, 7.2

Seite 7

4FTP-633MCL400/FTP-623DCL00270°(3)2070°30°(1)(2)12 (14)(1): Head down(2): Paper feed(3): Head up lockø12(ø14)(ø18)Paper center8521.553270.2 (Paper ins

Seite 8

5FTP-633MCL400/FTP-623DCL002Interface boardUnit: mmø3.6CN6CN4CN2 CN1CN516.55.185.142.513.35.190.246.510.05.1102.973.7108.0102.969.8Height of devices s

Seite 9

6FTP-633MCL400/FTP-623DCL002No. Signal I/O Contents No. Signal I/O Contents1 PRSTB I Data strobe 2 PRSTB-RET —Connected to logic GND3 PRDT0 I Data 0 4

Seite 10

7FTP-633MCL400/FTP-623DCL002No. Signal I/O Contents No. Signal I/O Contents1 ALE O Address latch 2 BRD — Data read3 BWR — Data write 4 READY — Data ac

Seite 11

8FTP-633MCL400/FTP-623DCL002 CONNECTOR PIN ASSIGNMENT1. Connector for logic power supply (CN1) Part number : B4B-XH-A-WHITE (J.S.T) or equivalent →

Seite 12

9FTP-633MCL400/FTP-623DCL0023. Connector for thermal head drive (CN7) Part number : 52030-2610 (Molex) or equivalent → P.C.B sideNo. Signal I/O Conte